Interested in purchasing Belzona’s repair composites and protective coatings?
How To Repair a Cracked Engine Block ……………………………………
WANT TO LEARN HOW TO BOND METAL TO METAL WITHOUT WELDING
Video – How To Repair a Cracked Engine Block
WANT TO LEAR HOW TO BOND METAL TO METAL WITHOUT WELDING
Click here to find out
Add an overline
Craft a captivating title for this section to attract your audience.
Use a clear and attention-grabbing short paragraph to engage your audience and draw them into reading the rest of your content.
Add a brief description to your card.
Add a brief description to your card.
Add a brief description to your card.
Give your list item a title
Add a single and succinct list item
Give your list item a title
Add a single and succinct list item
Give your list item a title
Add a single and succinct list item
STEP ONE
Clean Repair Area
Thoroughly clean the repair area. Remove all dirt, grease and other contaminants.
STEP TWO
Degrease Repair Area
Use Belzona 9111 (Cleaner/Degreaser) to degrease the repair area.
STEP THREE
Clean Damaged Repair Area
(Cleaner/Degreaser) to degrease the repair area.
Step Four
Terminate Cracks
To terminate the cracks, drill 3/16″ (48 mm) holes at their ends to prevent further propagation.
block-class 1 day, 1 hour and 1 minute
Add Glue
- step 234
- paste 1
- JET FUEL Tank’s Pitting Corrosion
Application Situation Jet fuel pipelines are a critical component of airport infrastructure and any problems must be addressed as soon as possible. Corrosion and erosion weaken pipelines and increase the risk of leakage. This not only poses a safety hazard to the airport, but can also lead to environmental pollution and significant economic losses.
Application Method The application was carried out in accordance with Belzona Know-How System Leaflet VPF-2 and two coats of Belzona 5831 was applied. As hot work was prohibited, manual surface preparation was carried out.
No damage was caused by this process.
Belzona Facts Belzona 5831 was chosen because it allowed minimum level of surface preparation, as there were concerns about damaging the pipe during surface preparation. Also because it can coat surfaces contaminated with oil. The asset remained operational during the application. This helped avoid expensive shutdowns and downtime just for repairs. - XXX – Time Funace
NO MIXING
Belzona 9631 is ready to use
ADHESION
Bonds to many substrates
TURNAROUND
Quick return to service
PRESSURE
Resists pressures ~7Bar
